Breadcrumbs

Need to buy coupe

More
14 Sep 2017 21:20 #7 by Warren Hampton
Replied by Warren Hampton on topic Need to buy coupe
Please keep us ported on this . W

Please Log in or Create an account to join the conversation.

More
14 Sep 2017 14:39 #8 by Warren Hampton
Replied by Warren Hampton on topic Need to buy coupe
That is why I joined EOC for , To help , enjoy,
and share. :-) W

Please Log in or Create an account to join the conversation.

  • Jack Arthur
  • Topic Author
14 Sep 2017 09:07 #9 by Jack Arthur
Replied by Jack Arthur on topic Need to buy coupe
Thanks I will look it up

Please Log in or Create an account to join the conversation.

More
13 Sep 2017 21:25 - 13 Sep 2017 22:07 #10 by Warren Hampton
Replied by Warren Hampton on topic Need to buy coupe
Jack, T-a-plane Ercoupe/Alon , web site, N5488E- 1965 two control, Plus as I remember it the lower sill and a wider opening with the slider... Warren under Alon there is a 3 control so look for the Ercoupe / Alon that is where to find it. Was at FBOs an saw thin a.m. pricy so make offer P.S. I would like to fly it myself...
Last edit: 13 Sep 2017 22:07 by Warren Hampton.

Please Log in or Create an account to join the conversation.

  • Jack Arthur
  • Topic Author
12 Sep 2017 15:27 #11 by Jack Arthur
Replied by Jack Arthur on topic Need to buy coupe
I know from my experience with the rudder system, it would be more of a challenge than I would want to take on. It is not like changing a coupe back that has been modified.

Please Log in or Create an account to join the conversation.

More
12 Sep 2017 15:23 #12 by Larry Snyder
Replied by Larry Snyder on topic Need to buy coupe
I think you're incorrect about removing the rudder pedals from an Alon Aircoupe. These airplanes were built as conventional 3-control airplanes. Remember, the nose wheel on an Alon is steered with the rudder pedals. So to remove these pedals, there would have to be a new connection from the yoke to the nose wheel. I have never heard of or seen an Alon without rudder pedals.

Please Log in or Create an account to join the conversation.

Time to create page: 0.128 seconds
Powered by Kunena Forum