Breadcrumbs

Wood prop

More
17 Feb 2024 09:58 #25 by David Gilson
Replied by David Gilson on topic Wood prop
Let's start the conversation. My number is 7274399916.

Please Log in or Create an account to join the conversation.

More
17 Feb 2024 09:34 #26 by Charles Dicey
Replied by Charles Dicey on topic Wood prop
I have a sensenich in like new condition

Please Log in or Create an account to join the conversation.

More
30 Jan 2024 23:55 #27 by Warren Hampton
Replied by Warren Hampton on topic Wood prop
Univair list wood props on their Ercoupe pages!

Please Log in or Create an account to join the conversation.

More
16 Jan 2024 21:39 #28 by Brooks McNew
Replied by Brooks McNew on topic Wood prop
David,

Fortunately, with a wooden prop you're not overly limited. There's a minimum/maximum diameter, but no numerical limits for pitch.

Look in TCDS A-718, at the end of page 2, section 3 of  Propellers and Propeller Accessories:

3.  Propeller with Continental C-75 or C-85 series engines
     (1)   Sensenich 74FC (pitch 48 to 52 in.) (including hub) or any fixed pitch wood propeller eligible for engine speed and power which meet static r.p.m. and diameter limits as follows: S/N 113 and up - Static r.p.m. at maximum permissible throttle setting not over 2100, not under 1850. No additional tolerance permitted.  Diameter: not over 74 in., not under 72 in. 


The Sensenich W72GK series are 72" diameter (which satisfies the TCDS) and is available in pitches from 42" to 52".  Univair sells them . Maybe some of the experienced C-75 pilots can chime in because this has been hotly debated, but for my C85 many consider 50"=cruise, 48"=normal and 46"=climb.

Please Log in or Create an account to join the conversation.

More
15 Jan 2024 15:06 #29 by David Gilson
Wood prop was created by David Gilson
I've been searching for a wood prop to fit my c-75 with no luck. The dimensions allowed as per the original tcds seem to be rather difficult to find. Anyone with a wood prop, let me know.
Thanks

Please Log in or Create an account to join the conversation.

Time to create page: 0.136 seconds
Powered by Kunena Forum