Breadcrumbs

Fuel Gauge

  • Peyton DeHart
30 Jan 2020 12:18 #1 by Peyton DeHart
Replied by Peyton DeHart on topic Fuel Gauge
Thank you very much. I'll admit to not typing "float" into the Univair web site because I looked all through the PDF Univair catalog and found nothing remotely close; not even the "cork" float.

You have solved my sight gauge concern.

Peyton

Please Log in or Create an account to join the conversation.

More
29 Jan 2020 20:50 #2 by Ronald Raty

Please Log in or Create an account to join the conversation.

  • Peyton DeHart
29 Jan 2020 13:52 #3 by Peyton DeHart
Replied by Peyton DeHart on topic Fuel Gauge
Speaking of the fuselage tank level indicator (with the metal indicator wire riding on a cork), I seem to go through corks that get water-logged, or fuel-logged, and lose floating ability a lot sooner than I expect. Is there a plastic bobber suitable substitute for the cork?

Peyton

Peyton DeHart
N5464F
(919) 259-6202

Please Log in or Create an account to join the conversation.

More
29 Dec 2017 18:12 #4 by Gordie Meade
Replied by Gordie Meade on topic Fuel Gauge
Yes and I really like it. I found out I am burning more fuel at cruise than I thought. I thought I was burning 5 to 5 1/2 gal/hr but it turns out I am burning 6.5 gal/hr. At full throttle during climb, I burn over 8 gal/hr. It has caused me to change the numbers I use to flight plan. I REALLY like having a fuel remaining value at any time.
A couple of posts ago, I posted a picture of the installation. It looks great and works well.

Please Log in or Create an account to join the conversation.

More
29 Dec 2017 14:34 #5 by George Sellers
Replied by George Sellers on topic Fuel Gauge
Gordie, have hou had the fuel instrumentation installed yet? If so, how is it doing?

Please Log in or Create an account to join the conversation.

More
30 Nov 2017 19:27 #6 by Gordie Meade
Replied by Gordie Meade on topic Fuel Gauge
Here's a picture with everything powered up.
Attachments:

Please Log in or Create an account to join the conversation.

Time to create page: 0.102 seconds
Powered by Kunena Forum