Breadcrumbs

Tech Help 874 topics

Got a question about maintaining, repairing, or operating your plane? Look here....

PLEASE NOTE - Any advice given on this forum is meant to broaden your knowledge based on the experiences of others. No advice here is intended to solve ANY specific problem with ANY airplane! Take the advice here and discuss it with your A&P. Remember, no one on this forum is going to sign your log book! The information you get here can make you smarter and perhaps lead you and your mechanic toward a solution to a problem, but in the end, you are the owner and the mechanic is putting his name in the log. If a suggestion or recommendation from this forum does not work out, please do not blame the poster on this forum! Advice is given sight unseen, based on information provided. Only you and your mechanic are actually looking at the airplane! All that said, ideas may be freely give with this disclaimer in mind!
Category
This is for Alon/M10 specific topics. If the topic is at all general, please move it the General Tech Help Category
Re: Elevator cable tension
by Martin Gibbs
14 Nov 2024 01:52
This category is for things specific to the earlier Ercoupe/Forney's which are different in many ways than the ALon/M10's.

However, if you have something of general interest, please post it there.
Re: Fuel pump A.D.
by David Gilson
14 Nov 2024 21:35

General 435 topics

Most all tech help requests should go here as they're likely to apply to all Coupes. However, if you have a specific item for Ercoupe/Forney's or ALon/M10's please put it there.
Re: Aluminum Polishing
by Keith Whitcomb
26 Oct 2024 15:49
Subject Replies / Views Last Post
Topic started 21 Jul 2018 09:30, by Denis Jacques
Last Post 25 Sep 2018 12:31
by Randy Hirsch AP
Replies:6
Views:12.1k
Last Post by Randy Hirsch AP
25 Sep 2018 12:31
Topic started 30 Jul 2018 22:28, by Bruce Bennett
Last Post 30 Jul 2018 22:28
by Bruce Bennett
Replies:0
Views:4634
Last Post by Bruce Bennett
30 Jul 2018 22:28
Topic started 01 Jul 2018 00:49, by Scott Whidden
Last Post 01 Jul 2018 00:49
by Scott Whidden
Replies:0
Views:5195
Last Post by Scott Whidden
01 Jul 2018 00:49
Topic started 29 Apr 2018 05:28, by Geoff Bryant
Last Post 30 Apr 2018 09:46
by Randy Hirsch AP
Replies:1
Views:4848
Last Post by Randy Hirsch AP
30 Apr 2018 09:46
Topic started 16 Sep 2017 09:59, by Allen Deyoe
Last Post 30 Apr 2018 02:03
by Warren Hampton
Replies:3
Views:10.3k
Last Post by Warren Hampton
30 Apr 2018 02:03
Topic started 14 Nov 2017 19:51, by John Chirtea
Last Post 17 Nov 2017 14:45
by Gordie Meade
Replies:7
Views:14.7k
Last Post by Gordie Meade
17 Nov 2017 14:45
Time to create page: 0.131 seconds
Powered by Kunena Forum