Breadcrumbs
- You are here:
- Home
- Forum
- DIscussions
- Tech Help
- Ercoupe/Forney Specific
- Right turn at altitude, straight and level flight - Ercoupe 415-D
- Forum
- DIscussions
- Tech Help
- Ercoupe/Forney Specific
- Right turn at altitude, straight and level flight - Ercoupe 415-D
Right turn at altitude, straight and level flight - Ercoupe 415-D
- Matt Gunsch
- Offline
Less
More
- Posts: 453
07 Dec 2019 14:35 - 07 Dec 2019 14:47 #1
by Matt Gunsch
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Replied by Matt Gunsch on topic Right turn at altitude, straight and level flight - Ercoupe 415-D
You are modifying a flight control, read the definition of a major repair or alteration,
FAR 43 appendix A (1) and (XIII), also read SM35 on rigging, paragraph 13.
Just because you have seen it on other planes, does not make it legal, just means someone did not take the time to do the job right. I had a friend with a 172 that had yawing/wing heavy condition, a mechanic put a tab on the rudder to "correct" the issue, and it was there for years, and of course, no logbook entry. I removed the tab, and then turned the cam on the rear spar of the right wing, problem was solved, all by changing the washout of the wing.
FAR 43 appendix A (1) and (XIII), also read SM35 on rigging, paragraph 13.
Just because you have seen it on other planes, does not make it legal, just means someone did not take the time to do the job right. I had a friend with a 172 that had yawing/wing heavy condition, a mechanic put a tab on the rudder to "correct" the issue, and it was there for years, and of course, no logbook entry. I removed the tab, and then turned the cam on the rear spar of the right wing, problem was solved, all by changing the washout of the wing.
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Last edit: 07 Dec 2019 14:47 by Matt Gunsch.
Please Log in or Create an account to join the conversation.
- Ken Thompson
- Offline
Less
More
- Posts: 136
01 Dec 2019 21:10 #2
by Ken Thompson
Replied by Ken Thompson on topic Right turn at altitude, straight and level flight - Ercoupe 415-D
Larry, why the recommendation to remove the tabs?
Please Log in or Create an account to join the conversation.
- Larry Snyder
- Offline
Less
More
- Posts: 707
01 Dec 2019 20:53 #3
by Larry Snyder
Replied by Larry Snyder on topic Right turn at altitude, straight and level flight - Ercoupe 415-D
There was an SB recommending the removal of the aileron trim tabs but there was no AD so I assume they are legal.
Please Log in or Create an account to join the conversation.
- Ken Thompson
- Offline
Less
More
- Posts: 136
01 Dec 2019 20:35 #4
by Ken Thompson
Replied by Ken Thompson on topic Right turn at altitude, straight and level flight - Ercoupe 415-D
Matt, can you post a reference to support this?
These tabs have been on this plane a long time and have passed every annual performed by many different IAs.
These tabs have been on this plane a long time and have passed every annual performed by many different IAs.
Please Log in or Create an account to join the conversation.
- Matt Gunsch
- Offline
Less
More
- Posts: 453
01 Dec 2019 20:26 #5
by Matt Gunsch
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Replied by Matt Gunsch on topic Right turn at altitude, straight and level flight - Ercoupe 415-D
nothing like advertising an unapproved/illegal modification to a flight control
A&P, IA, PPSEL
too many years GA and Warbird Maint
Check out the Ercoupe Discussion group on facebook
Please Log in or Create an account to join the conversation.
- Ken Thompson
- Offline
Less
More
- Posts: 136
10 Nov 2019 19:12 #6
by Ken Thompson
Replied by Ken Thompson on topic Right turn at altitude, straight and level flight - Ercoupe 415-D
Please Log in or Create an account to join the conversation.
- Forum
- DIscussions
- Tech Help
- Ercoupe/Forney Specific
- Right turn at altitude, straight and level flight - Ercoupe 415-D
Time to create page: 0.127 seconds