Breadcrumbs

Conversion of C75-12F to C85

More
30 Nov 2017 19:48 #1 by Larry Snyder
Replied by Larry Snyder on topic Conversion of C75-12F to C85
Gordon, sorry for the delay replying. I'll try to find it next time I'm out at the hangar.

Please Log in or Create an account to join the conversation.

More
06 Nov 2017 08:27 #2 by Gordon Bowers
Replied by Gordon Bowers on topic Conversion of C75-12F to C85
Larry, do you have a PDF copy of the full text of the O-200 crank,rods,pistons STC? Thanks. Gordon

Please Log in or Create an account to join the conversation.

More
11 Jun 2017 08:47 #3 by Larry Snyder
Replied by Larry Snyder on topic Conversion of C75-12F to C85
I have a C-85 with the O-200 crank and a 7149 prop. I cruise at 2400 with the throttle back a little. At full throttle I get a little over 2500 rpm. So it sounds that a 7150 might have a little lower top RPM. My static is about 2225. With a light airplane (me and not full fuel) I climb at 1200 fpm on a cool day. Worst case is 300-400 fpm loaded on a hot day. I cruise at 105-110 depending on how heavy we are. If you are flying heavy, you will get nowhere near redline. At least that's my experience.

Please Log in or Create an account to join the conversation.

  • Arlan Allen
30 May 2017 14:23 #4 by Arlan Allen
Replied by Arlan Allen on topic Conversion of C75-12F to C85
Have you had the tach checked? I found an error or 75 RPM in my tach. It was reading low ie. 2575 equalled 2500 indicated.

Arlan
N3989H

Please Log in or Create an account to join the conversation.

More
30 May 2017 14:14 #5 by Ken Thompson
Replied by Ken Thompson on topic Conversion of C75-12F to C85
Bill, you might post your issue on the Yahoo group. This email address is being protected from spambots. You need JavaScript enabled to view it.

It's a very active forum.

Please Log in or Create an account to join the conversation.

More
30 May 2017 13:59 #6 by William James
Replied by William James on topic Conversion of C75-12F to C85
Ken Thompson

Ken

My concern is not so much related to airspeed . My concern is that the engine is rated at 2575 Max RPM and I can't approach that performance. Never had a plane that required throttle firewalled to get 70% power.

Bill

Please Log in or Create an account to join the conversation.

Time to create page: 0.143 seconds
Powered by Kunena Forum